[satellitedishes]

i have a rac 200 problem with satellite losing signal. it can be working fine then absolutly no signal this is driving me mad ive searched everywhere for an answer to this question. ive charged the gps reloaded the software the only thing i can see is the config file which says
GPSPort=7
GPSBaudRate=4800

is this correct not impressed with sat nav so far determined to solve the problem need a lot of help
:mad::mad::mad:

[smudger]

Phone the number on the back of your sat-nav they will be able to give you the help you need. Sounds like a question for Mike or Andrew, but neither of them have been on the site for a while. Good luck.

BTW. Do you know if anyone else has the same problem in your area, especially if they have a different make of sat-nav?
Cheers, Smudger.

[Mike Gray]

Originally Posted by smudger879n

Phone the number on the back of your sat-nav they will be able to give you the help you need. Sounds like a question for Mike or Andrew, but neither of them have been on the site for a while. Good luck.

BTW. Do you know if anyone else has the same problem in your area, especially if they have a different make of sat-nav?
Cheers, Smudger.

I'm here, I'm just not the right person to offer technical advice on the satnav. :)

[smudger]

Ah! and you were doing so well last time;)
While you are here, I have set my POI alarm to not "Only on Route" and ticked "all the speeds" in the unit. Does that mean I will now get the Alarm when it detects a safety camera?
Cheers, Smudger

[minette1984]

I bought one of these as a christmas present and it has that same problem. Originally it was unable to receive any signal so I re-installed the software. It now takes ages for the system to gain a signal and if does it does not pick up the right location or quickly drops out. I have emailed the RAC and have yet to receive a reply.

[satellitedishes]

helpline

i rang the helpline and explained problem and they suggested i return it to them so they can investigate:):):)