Hi everyone I have a 2011 2.0cdt insignia that won’t start.I have a U0140-71 fault in the electronic brake control module lost communication -invalid data with body control module.I have replaced the Bcm,Ecu & reprogrammed them using sps & an mdi init.I am getting no fuel at the common rail but plenty from the low pressure pump.I have replaced the fuel rail pressure sensor & the high pressure pump.I have checked the canbus system for power,grounds & resistance which all check out good.As anyone hade a problem with a ebcm causing a car not to start before I replace it & have to bleed the brake system.
TIA
TIA
